H26M62002JPR SK hynix 32GB eMMC 5.1
H26M62002JPR is a SK hynix 32GB managed NAND device with an eMMC 5.1 HS400 interface in a 153-ball FBGA package. Its embedded controller manages wear levelling, bad blocks, garbage collection and ECC.
As listed on DramTrade inventory. Final allocation and lead time are confirmed in quotation. Inventory source
H26M62002JPR Specifications
Basic specifications
- Manufacturer
- SK hynix
- Part number
- H26M62002JPR
- Memory type
- eMMC 5.1 managed NAND
- Capacity
- 32GB
- NAND stack
- 128Gb × 2
- Data bus width
- 1 / 4 / 8-bitHS400 requires the 8-bit bus.
Interface & electrical
- HS400 interface rate
- Up to 400 MB/sBus interface limit, not guaranteed flash read/write speed.
- Interface clock
- 0–200 MHzBoot clock: 0–52 MHz; operating mode limits apply.
- VCC operating range
- 2.7–3.6 VNAND supply; not the I/O rail.
- VCCQ operating range
- 1.7–1.95 VController / I/O supply; HS400 uses the 1.8 V interface.
- HS400 requirements
- 8-bit · 1.8 V VCCQUse the documented mode-selection sequence.
- Characterized sequential R/W
- 280 / 90 MB/sDevice-level HS400, 512 KB chunks, cache on; not 100% tested. Not a guaranteed minimum.
Package & temperature
- Package
- 153-ball FBGA
- Body dimensions
- 11.50 × 13.00 mmW × L; each dimension ±0.10 mm.
- Overall height
- 0.70 ±0.10 mmMaximum 0.80 mm; lineup uses the 0.8 mm package designation.
- Ball pitch
- 0.50 mm
- Non-operating storage
- −40°C to +85°CStorage rating is not the operating range.
Technical notes & sources
Interface and throughput. HS400 is an 8-bit, 1.8 V VCCQ interface operating up to a 200 MHz DDR clock and 400 MB/s bus rate. The separate sequential performance table uses device-level measurements, 512 KB chunks and cache enabled, and is marked not 100% tested; it is not an allocation or performance guarantee.
Power and mode selection. VCC is 2.7–3.6 V and VCCQ is 1.7–1.95 V. Do not issue commands until both supplies are stable. Follow the documented HS400 transition sequence; DDR4 CL, VPP and refresh values do not describe this eMMC device.
Package. Figure 2 gives a total height of 0.70 ±0.10 mm (0.80 mm maximum), while the lineup names the 0.8 mm package.
Manufacturer declaration: The SK hynix e-NAND datasheet states compliance with the RoHS directive.
Manufacturer sources: SK hynix e-NAND datasheet · Rev. 1.0
H26M62002JPR Datasheet
Document review: 2026-10-23 · Related-part update: 2026-10-24
153-ball FBGA · 11.5 × 13.0 mm body · 0.5 mm ball pitch. Manufacturer drawing, not a product photo.
Selection notes
How does H26M62002JPR differ from H26M51002KPR?
H26M62002JPR is the 32GB, 128Gb × 2 NAND-stack part. H26M51002KPR is the 16GB, 128Gb × 1 part. Both use the listed 153-ball, 11.5 × 13.0 mm package.
Does HS400 mean 400 MB/s flash read speed?
No. 400 MB/s is the documented HS400 bus-interface limit, not a guaranteed NAND read/write rate. HS400 requires an 8-bit bus and 1.8 V VCCQ; use the separate characterized performance figures with their stated test conditions.
How to request a quote
Four required fields. Other preferences are optional.
Exact part & quantity
Check the complete MPN in this RFQ. Add your name, email, quantity and destination.
Optional requirements
Add your requirements if needed. Multiple parts can also be sent by email.
Written quotation
Offered quantity, lead time and commercial terms are confirmed in writing. An enquiry does not reserve stock.
Why DramTrade.com?
One Connection. A World of Memory Supply.
From high-demand memory to hard-to-find parts, DramTrade helps you find the supply you need.
Exact Parts, Clear Details
Confirm the complete part number, condition, date codes and packaging before ordering.
Clear Supply & Quote Terms
Review availability, delivery timing, pricing and payment terms before you commit.
One Contact, Start to Finish
Work with one contact for your enquiry, delivery updates and order questions.