Samsung · Exact-part sourcing
Samsung KLMAG1JETD-B041006 eMMC
Request KLMAG1JETD-B041006 for your component BOM or repair requirement. Samsung documents the shorter KLMAG1JETD-B041 as a 16GB eMMC; retain 006 when matching the offered device to your approved reference.
Request Quote- Manufacturer
- Samsung
- Product category
- eMMC
- Requested ending
- B041006
Base-model reference — full suffix not verified
The 16GB KLMAG1JETD-B041 reference
Samsung Rev. 1.21, pages 4–6, covers KLMAG1JETD-B041. It does not define 006. The following values describe that base model, not a verified specification or programming state for the complete B041006 reference.
| Referenced part | KLMAG1JETD-B041 [source] |
|---|---|
| Nominal capacity | 16GB [source] |
| NAND configuration | 128Gb × 1 [source] |
| Interface | eMMC 5.1 [source] |
| Package | 153-ball FBGA [source] |
| Package dimensions | 11.5 × 13 × 0.8 mm [source] |
Read the source in context
Samsung eMMC Rev. 1.21 — LCSC-hosted copy, pages 4–6 (opens in a new tab)Use the applicable manufacturer document for engineering approval. A published reference does not confirm the identity or condition of an offered physical lot.
Technical reference reviewed: . This is not an inventory update.
Exact-model purchasing
16GB is not a promise of 16GB for an application image
The base-model product table lists 16GB nominal capacity and a 91.0% user-density figure. Nominal flash capacity and host-addressable storage are therefore not the same quantity. Confirm the required logical capacity and partition layout against the applicable device documentation before approving an image or purchasing a replacement.
For B041006, include any required boot content or configuration as a separate purchasing requirement. Neither the capacity label nor the 006 ending establishes that a supplied component contains the software needed by your board.
Exact-model purchasing
Managed flash, not a raw-NAND or DRAM replacement
Samsung's base document describes NAND flash and an MMC controller in the eMMC device, with flash management handled internally. A raw-NAND interface or a DRAM controller is not the interface described by this reference.
For a repeat build, compare the complete component code with your approved BOM. For a repair, include the board identifier and readable device marking so an offer can be checked against the actual requirement, not just a request for a 16GB chip.
Before accepting an offer
Ordering checks for KLMAG1JETD-B041006
Image and partition requirement
Specify the minimum logical storage and any required programmed content. Ask for an explicit response; programming is not implied by this listing.
Complete 006 identity
Keep KLMAG1JETD-B041006 on the enquiry, offered MPN and acceptance record. A shorter B041 offer requires clarification before approval.
Send quantity and destination
Add a requested delivery date, date-code range or packing preference if needed; “No preference” is fine. The written offer separates confirmed supply terms from pending details.
Exact-MPN quotation
Request KLMAG1JETD-B041006
Your enquiry opens with this exact part number prefilled.