Samsung · Exact-part sourcing
KLM4G1FETE-B041001
Enquire for Samsung KLM4G1FETE-B041001 as an eMMC component, not a DRAM chip. Use the base-model document as a starting point for review and retain 001 on the requested ordering reference.
Request Quote- Manufacturer
- Samsung
- Product category
- eMMC
- Requested ending
- B041001
Base-model reference — full suffix not verified
The KLM4G1FETE-B041 reference
Samsung's Rev. 1.0 datasheet, page 4, identifies KLM4G1FETE-B041 without 001. The table below is base-model context; it does not establish the meaning or electrical applicability of the full B041001 suffix.
| Referenced part | KLM4G1FETE-B041 [source] |
|---|---|
| Nominal capacity | 4GB [source] |
| Interface | eMMC 5.1 [source] |
| Package | 153-ball FBGA [source] |
| Package dimensions | 11 × 10 × 0.8 mm [source] |
Read the source in context
Samsung KLM4G1FETE-B041 Rev. 1.0 — LCSC-hosted copy, pages 4–6 (opens in a new tab)Use the applicable manufacturer document for engineering approval. A published reference does not confirm the identity or condition of an offered physical lot.
Technical reference reviewed: . This is not an inventory update.
Exact-model purchasing
Check more than the capacity label
The base document describes NAND flash with an integrated controller. It is not a raw-NAND or DRAM specification, and a matching capacity does not establish a replacement for either type of memory.
For your B041001 enquiry, state the approved board reference and whether the purchase requires programmed content or a particular boot configuration. Any such requirement needs an explicit response in the offer; a part-number listing alone does not promise programming services or a ready-to-boot device.
Before accepting an offer
Ordering checks for KLM4G1FETE-B041001
Physical fit
Have engineering compare the applicable ball map, footprint and height with the board drawing. A ball-count match alone is not sufficient.
Content and configuration
If your process depends on an image or boot setup, identify that requirement before accepting supply. Do not assume 001 describes its contents.
Send quantity and destination
Add a requested delivery date, date-code range or packing preference if needed; “No preference” is fine. The written offer separates confirmed supply terms from pending details.
Exact-MPN quotation
Request KLM4G1FETE-B041001
Your enquiry opens with this exact part number prefilled.