Micron · Exact-part sourcing
MT41K512M8DA-107:P — Micron 4Gb x8 DDR3L
The commercial-temperature 4Gb x8 DA-107:P part. This ordering code has no IT marker. Use the complete reference when matching an approved commercial build, and keep the industrial IT:P variant on a separate quotation line.
Request Quote- Density / width
- 4Gb / x8
- Data rate
- 1866 MT/s
- Nominal supply
- 1.35V
- Grade
- Commercial
Manufacturer reference
Commercial DA-107:P specification reference
Micron's 4Gb DDR3L Rev. R, pages 1–2, uses MT41K512M8DA-107:P as its ordering example. The absence of a temperature marker denotes the commercial case range. Datasheet revision R and device revision :P are different identifiers.
| Density / organization | 4Gb / 512M × 8 [source] |
|---|---|
| -107 bin | 1866 MT/s; CL 13 [source] |
| VDD / VDDQ | 1.35V nominal (1.283–1.45V) [source] |
| DA package | 78-ball FBGA, 8 × 10.5 mm [source] |
| Commercial case range | 0°C ≤ TC ≤ +95°C [source] |
| Device revision | :P [source] |
Read the source in context
Micron 4Gb DDR3L Rev. R — Mouser-hosted copy, pages 1–2 (opens in a new tab)Use the applicable manufacturer document for engineering approval. A published reference does not confirm the identity or condition of an offered physical lot.
Technical reference reviewed: . This is not an inventory update.
Exact-model purchasing
A DDR3 offer needs its voltage conditions checked
Micron documents this as DDR3L with 1.35V operation and a 1.5V-compatible mode. For a board running at a different supply condition, have engineering apply the relevant limits and timing information instead of approving an offer solely because it says DDR3.
State the approved part number and operating requirement in your enquiry. A lower-voltage family label is useful identification, but it is not a substitute for checking the board's complete interface requirements.
Exact-model purchasing
Keep the document revision separate from the chip revision
The :P ending belongs to the component identity. Do not rewrite it as :R because the source PDF is revision R. Record the document revision separately when attaching a datasheet to an approval package.
For repeat procurement, use the exact commercial :P line rather than a search phrase such as Micron 4Gb 1866. A different speed, temperature marker or package should remain an explicitly identified alternative until accepted.
Exact commercial part identity
The commercial ordering reference has its own Micron catalog entry. Retain the colon and final P when communicating the requested part.
Micron — MT41K512M8DA-107:P (opens in a new tab)Before accepting an offer
Ordering checks for MT41K512M8DA-107:P
Commercial BOM match
Confirm that the approved requirement is the unmarked commercial variant, not IT:P.
Voltage and revision
Review the board's supply mode and retain :P on the offered MPN; record datasheet revision separately.
Send quantity and destination
Add a requested delivery date, date-code range or packing preference if needed; “No preference” is fine. The written offer separates confirmed supply terms from pending details.
Exact-MPN quotation
Request MT41K512M8DA-107:P
Your enquiry opens with this exact part number prefilled.