Micron · Exact-part sourcing
MT41K512M8DA-107 IT:P — Micron 4Gb x8 DDR3L
A 4Gb x8 DDR3L component for a BOM that specifies the industrial IT:P ordering variant. Keep IT in the enquiry: MT41K512M8DA-107:P is a separate commercial-temperature request, even though the core density and speed bin match.
Request Quote- Density / width
- 4Gb / x8
- Data rate
- 1866 MT/s
- Package
- 78-ball FBGA
- IT case range
- −40°C to +95°C
Manufacturer reference
Industrial DA-107 IT:P specifications
Micron's exact catalog entry and 4Gb DDR3L Rev. R, pages 1–2, support these ordering fields. TC is case temperature, not an ambient-temperature rating for the complete board.
| Family / density | DDR3L / 4Gb [source] |
|---|---|
| Organization | 512M × 8 [source] |
| Data rate | 1866 MT/s [source] |
| Nominal voltage | 1.35V [source] |
| DA package | 78-ball FBGA, 8 × 10.5 mm [source] |
| Industrial case range | −40°C ≤ TC ≤ +95°C [source] |
| Die revision | :P [source] |
Read the source in context
Micron — exact MT41K512M8DA-107 IT:P catalog entry (opens in a new tab)Use the applicable manufacturer document for engineering approval. A published reference does not confirm the identity or condition of an offered physical lot.
Technical reference reviewed: . This is not an inventory update.
Exact-model purchasing
The cold-end requirement is a reason to retain IT
A buyer specifying this industrial variant should require the full IT:P code in the written offer. Do not accept removal of IT as a cosmetic change: the commercial part's stated lower temperature limit differs.
Give engineering the operating environment and board thermal assumptions when evaluating another grade. Purchasing should match the approved temperature requirement, not independently infer compatibility from a shared 4Gb label.
Exact-model purchasing
Separate device width from total board capacity
This request is for an x8 component, not an x16 device or a finished memory module. Confirm the component organization and populated device count against the board's approved BOM before reviewing capacity alternatives.
If an offer lists TW instead of DA, request the exact alternative part number and drawing. A shared Micron DDR3L family does not make a different package a pin-compatible replacement.
Ordering guide and operating conditions
The ordering guide distinguishes IT from the unmarked commercial grade and defines DA as the x8-compatible 78-ball package for revision P.
Micron 4Gb DDR3L Rev. R — Mouser-hosted copy, pages 1–2 (opens in a new tab)Before accepting an offer
Ordering checks for MT41K512M8DA-107 IT:P
Industrial requirement
Ensure IT:P appears on the offered reference and supporting identification; keep commercial-temperature alternatives separate.
BOM organization
Match 512M8 and DA to the approved x8 component footprint before accepting another density or width.
Send quantity and destination
Add a requested delivery date, date-code range or packing preference if needed; “No preference” is fine. The written offer separates confirmed supply terms from pending details.
Exact-MPN quotation
Request MT41K512M8DA-107 IT:P
Your enquiry opens with this exact part number prefilled.