SK hynix DDR4 Memory
H5AN4G6NBJR-UHC — SK hynix 4Gb 256M x16 DDR4
H5AN4G6NBJR-UHC is an SK hynix 4Gb 256M x16 DDR4 component: 2400 MT/s, 17-17-17 timing, 1.2V supply and 96-ball FBGA. Review the x16 device and request exact UHC availability.
Request Quote- Density
- 4Gb
- Organization
- 256M x16
- Data rate
- 2400 MT/s
- Supply
- 1.2V ±0.06V
- Package
- 96-ball FBGA
Sourced technical facts
H5AN4G6NBJR-UHC Specifications
Each listed field links to its manufacturer reference. Unverified electrical or qualification details are not filled in from neighboring part numbers.
Exact model identity
A 4Gb x16 device, not the similarly named x8 part
The 256M x16 organization is the useful starting point when matching this part to a board or BOM. It describes a sixteen-bit data interface; the total 4Gb density alone does not tell you how the memory connects to the controller.
H5AN4G8NBJR-UHC is the nearby x8 ordering choice in the same manufacturer document. It uses a 78-ball package instead of this part's 96-ball package. Keep the 6 in H5AN4G6NBJR visible during sourcing: a matching UHC suffix cannot make those two organizations interchangeable.
Selection boundary
Read UHC as a complete speed selection
For this BJR device, UH selects 2400 MT/s with 17-17-17 timing. Those three values express clock-cycle requirements, not three nanosecond values. A controller configuration needs both the operating rate and the corresponding timing limits.
VKC is a separate 2666 MT/s selection. If a seller proposes VKC against a UHC requirement, ask engineering to review the intended operating point and full timing table. A higher advertised bin is not, on its own, approval to change an existing BOM.
Before approving the offer
Ordering checks for H5AN4G6NBJR-UHC
Match the sixteen-bit interface
Check the x16 ball map against the board drawing, including both byte lanes; do not approve by density alone.
Keep UHC on the offer
The request and quoted MPN should retain the 2400-bin suffix, or identify an alternative explicitly for review.
Identify the delivered part
Where available, request a readable marking or packing-label image showing the complete base part and suffix before approving the offered lot.
Send quantity and destination
Date code, packing and requested delivery date are optional preferences; “No preference” is acceptable. If a quotable source is identified, the written offer separates confirmed quantity, condition, lead time, price and terms from items still pending.
Manufacturer specifications identify the device. Your engineering team confirms system fit; DramTrade confirms the proposed supply in a quotation. An enquiry does not reserve stock.
Browse SK hynix memory references. Catalog navigation does not imply approved replacements.
Exact-MPN quotation
Request H5AN4G6NBJR-UHC
Have several parts? Email your BOM or start with this exact MPN prefilled.